The vibration and pull-in mechanism of two coupled elastically restrained beams assembly subjected to electrostatic force

ABSTRACT

The novel model of the coupled beam-type electrodes with elastic roots, subjected to the AC and DC voltages is constructed. The exact critical pull-in voltage of the two coupled elastically restrained beams with size effect is presented. The analytical method of the general system subjected to the AC and DC voltages simultaneously is presented. The characteristic mechanism of coupled vibration is investigated.     

运输机皮带撕裂原因分析及特征实验研究

带式运输机是重要的连续性运输设备，皮带撕裂是造成带式运输机运输失效的重要因素。详细分析了引起皮带撕裂的常见原因，并给出了合理的预防措施。针对皮带撕裂现象构建皮带撕裂实验平台，并通过皮带受力应变实验分析掌握了皮带撕裂的特征，为预防皮带撕裂的发生提供了一定的理论依据。     

Effects of different drying methods on the physicochemical property and edible quality of fermented Pyracantha fortuneana fruit powder

In this study, hot air drying (HAD), hot air-/microwave-assisted vacuum drying (HAMAVD) and hot air-assisted microwave drying (HAAMD) were applied to lactic acid-fermented Pyracantha fortuneana fruit (PFF). Influences of different drying methods on fluidity and dispersion, microstructure, hygroscopicity, rehydration, colour change, sourness and energy consumption were investigated. Results showed that HAAMD had the best overall performance on the quality of the PFF powder. HAAMD PFF powder had higher expansion force (1.65 mL g⁻¹) and water-holding capacity (2.68 g g⁻¹), lower degree of compression (9.09%) and energy consumption, smaller colour change and better taste. Organic acids (mainly malic acids) of all drying powders decreased, but HAAMD and HAMAVD could better improve the acidity characteristics of PFF powders, which may be related to the drying time and the temperature change processes. Consequently, this study can provide references for the utilisation of fresh PFF, the design and commercialisation of PFF-related products.     

基于瓦斯涌出特征的钱家营矿掘进工作面突出预警系统应用

为实现钱家营矿掘进工作面煤与瓦斯突出实时预警,提出一种基于瓦斯涌出特征的预警方法。依据巷道高低浓度甲烷传感器实时监测数据,通过离散回归理论分析煤与瓦斯突出前的瓦斯涌出量,建立预警指标特征序列,确定掘进工作面煤与瓦斯突出预警指标危险临界值:方差0.018,波峰差0.41,波动斜率±0.027。在此基础上构建了非接触式煤与瓦斯突出可视化预警系统并在钱家营矿进行现场应用。结果表明,以瓦斯涌出特征值作为预警指标,能够准确监测到井下瓦斯异常现象,达到瓦斯数据实时解算和可视化预警的目的,为钱家营矿掘进工作面防突工作提供技术借鉴。     

喷淋液滴在空气环境下的运动特性

本文以喷淋液滴在空气环境下运动特性为工程背景，建立单个液滴在常温、常压空气环境中的动量方程，分析液滴沉降特性、追赶特性及运动轨迹行为。计算结果表明，不同喷淋液滴初始条件下，短时间内存在重力大于曳力和重力小于曳力两种情况，但最终减速液滴均会达到受力平衡状态；液滴离开喷淋头后，垂向位移均迅速增大，液滴粒径越大、初始速度越大，垂向位移增长的速率也越大，达到相同位移的用时越短；液滴尺寸、初始速度相差越大，液滴追赶所用的时间越短，追赶位移越小，液滴尺寸、初始速度越接近，液滴追赶所用的时间越长，追赶位移越大；液滴初始速度越大、初始直径越大、喷射角度越大，横向速度消失越慢，达到的横向位移越大，喷射液滴覆盖的面积也越大。计算结果有助于优化工程实际中喷淋系统的设计与布置。     

A review on ultrasonic spot welding of copper alloys

As a solid state joining process, ultrasonic spot welding has been proven to be a promising technique for joining copper alloys. However, challenges still remain in employing ultrasonic spot welding to join copper alloys. This article comprehensively reviews the current state of ultrasonic spot welding of copper alloys with a number of critical issues including materials flow, plastic deformation, temperature distribution, vibration, relative motion, vertical displacement, interface friction coefficient, online monitoring technique, coupled with the macrostructure and microstructure, the mechanical properties and electrical conductivity. In addition, the future trends in this field are provided.     

Tailoring electromagnetic absorption performances of TiO2/Co/carbon nanofibers through tuning graphitization degrees

Low density, high stability and strong dielectric loss capacity endow carbon-based nanocomposites with superb microwave dissipation performances. Different from grapheme or carbon nanotubes, the graphitization degrees of carbon-based composites derived from the organic precursor pyrolysis can be accurately regulated by controlling the carbonization temperature. As such, their electromagnetic properties can be easily tuned. In this work, we report the preparation of TiO₂/Co/Carbon nanofibers (CNFs) through a combined approach of electrospun and carbonization at different temperatures. The nanofibers with an average diameter of 300 nm were coated by a dense layer of TiO₂ and embedded by Co/CoO nanoparticles. The performance evaluation indicated the composite obtained at 700 °C exhibits remarkably strong absorption of −63.2 dB at 9.8 GHz and wide effective absorption bandwidth of 6.4 GHz with a pretty low filling rate of 15 wt%. Further analysis on the electromagnetic behaviors shows that the composite possesses regulable impedance matching characteristic and absorption performances, implying the huge application potential under various demand conditions.     

注采比对“二三结合”开发模式渗流特征的影响

大庆油田的开发逐渐进入高含水阶段,厚油层动用程度低,"二三结合"开发模式是有效的提高厚油层动用程度,改善水驱开发效果,提高油田采收率的有效手段。在"二三结合"开发模式注聚阶段中注采比对井间压力、含水饱和度等变化有重要影响。为了探究注采比对开发层位的井间压力及饱和度的影响,利用油藏数值模拟方法,模拟了相同的开发模式不同注采比的生产情况,绘制了不同注采比情况下,不同层位的井间压力及含水饱和度变化情况,为维持地层压力平衡,保持油田稳定生产提供有力的依据。     

Application of higher order spectral features and support vector machines for bearing faults classification

Condition monitoring and fault diagnosis of rolling element bearings timely and accurately are very important to ensure the reliability of rotating machinery. This paper presents a novel pattern classification approach for bearings diagnostics, which combines the higher order spectra analysis features and support vector machine classifier. The use of non-linear features motivated by the higher order spectra has been reported to be a promising approach to analyze the non-linear and non-Gaussian characteristics of the mechanical vibration signals. The vibration bi-spectrum (third order spectrum) patterns are extracted as the feature vectors presenting different bearing faults. The extracted bi-spectrum features are subjected to principal component analysis for dimensionality reduction. These principal components were fed to support vector machine to distinguish four kinds of bearing faults covering different levels of severity for each fault type, which were measured in the experimental test bench running under different working conditions. In order to find the optimal parameters for the multi-class support vector machine model, a grid-search method in combination with 10-fold cross-validation has been used. Based on the correct classification of bearing patterns in the test set, in each fold the performance measures are computed. The average of these performance measures is computed to report the overall performance of the support vector machine classifier. In addition, in fault detection problems, the performance of a detection algorithm usually depends on the trade-off between robustness and sensitivity. The sensitivity and robustness of the proposed method are explored by running a series of experiments. A receiver operating characteristic (ROC) curve made the results more convincing. The results indicated that the proposed method can reliably identify different fault patterns of rolling element bearings based on vibration signals.